-
- 20-pole ferrite magnet rotors. I used pairs of magnets 46x40mm because I got them for low cost.
-
- 15 coils stator. 24V output
-
- blade assembly using stainless screws.
-
- Tower assembly with very good roadside access.
-
- bolting on the top piece. Each section is 7.5m long 89mm diameter pipe.
-
- Blades had to be mounted at a jaunty angle to fit between the obstructions along the road.
-
- Tail is made from 6mm birch plywood.
-
- up and working…
-
- Furling nicely at about 1kW output
Thanks for sharing Hugh !!!!